Red-lion CSMSTRV2 Manual de usuario descargar pdf (Pagina 7)

LEDS

STS – STATUS LED

The green Status LED provides information regarding the state of the Master,

as well as the rest of the system. This includes indication of the various stages

of the start-up routine (power-up), and any errors that may occur.

Startup Routine

Rapidly Flashing

INDICATION

Master is currently running the boot loader and/or

being flash upgraded by Crimson.

Steady Master is operating properly.

USER COMMUNICATION PORTS - TX/RX LEDS

ETHERNET LEDS

Error States

1 blink, pause, repeat

LED

One or more slave modules are missing from the

system. Master and installed modules will perform

normally in this state.

INDICATION

2 blinks, pause, repeat

Missing configuration, or configuration being

updated by Crimson.

3 blinks, pause, repeat

Quantity of module bases does not match

configuration file. Master will not communicate

with the modules until the error is corrected.

4 blinks, pause, repeat

Termination plug not installed, or one or more

bases are malfunctioning. Master will not

communicate with the modules until the plug is

reinstalled, and power is cycled.

TransmittingGREEN

ReceivingRED

INDICATIONLED

Note: LEDs are not available on the Programming Port: RS232/PG.

Link EstablishedYELLOW (Solid)

100 BASE-TX CommunicationsAMBER

10 BASE-T CommunicationsGREEN

Network ActivityYELLOW (Flashing)

INDICATIONLED

1 2 3 4 5 6 7 8

Sin comentarios

Red-lion CSMSTRV2 Manual de usuario Pagina 7